To better carry out mulberry and yellow planting, the techniques involved must also be mastered in place. How many people have studied the bacterial rods and preparation of bacterial strains? How should we proceed? With these questions in mind, let's take a look at the operations of professionals and see how to proceed!
To prepare the original seeds, it is necessary to first select high-quality wheat grains and select the impurities in the stones, as well as some insect eaten particles. Afterwards, soak in hot water and put it into a bottle for high-pressure sterilization treatment. Generally, people can grasp the time required for sterilization to reach one and a half hours at a high temperature of 121 degrees Celsius, which is enough. Wait until it has cooled down before connecting the mother seed of Sanghuang. Be sure to do so under sterile conditions, otherwise the previous sterilization operation may be in vain.
Afterwards, use a constant temperature of 28 degrees for cultivation, and be careful not to have the temperature too high or too low, otherwise it will not be suitable. Under normal circumstances, thirty to forty capsules can grow into the entire strain bottle, so everyone can handle and mix according to this ratio. However, it should be noted that because the mulberry yellow strain is prone to degradation, it is important to choose a strain that grows very vigorously before inoculation, as this will result in faster growth and higher yield. As for which degraded strains are prone to the occurrence of miscellaneous bacteria, it is also detrimental to production, so it is necessary to avoid them.
Later on, we will come to the preparation process of the mushroom rod in the cultivation of mulberry yellow. Generally, the diameter should be around 20 centimeters, while the length should be around 40 centimeters. Soak wood segments of similar size in water and place them in high-pressure bacterial bags. Both ends can be filled with substances such as sawdust or wheat bran, which is more beneficial for fungal growth.
After the sterilization treatment of the bacterial rod, the secondary wheat seed can be inserted, and it can also grow at a temperature of about 28 degrees Celsius, or slightly lower at around 25 degrees Celsius, which is more suitable. Pay attention to ensuring that the stage of fungal growth is in a dark environment, otherwise the mycelium is prone to aging, which is detrimental to the cultivation of mulberry yellow.